100% Acrylic Resin Rubber Spray Paint Removable For Car Wheel
Product Advantages:
1.100% acrylic resin
2. fast dry
3. be used in surface finishing and mending
4. interior-exterior use
5. Low chemical odor
6. Last for 2 years
Basic info
| Brand name |
Plyfit |
Product name |
Rubber paint |
Carton size |
D220 x W165x H240(mm) |
| Color |
red |
Capacity |
400ml |
QTY/CTN |
12PCS |
| Type |
coating and paint |
Production time |
25-30days |
G.W./CTN |
3.5KGS |
| Payment terms |
negotiable |
Expiration date |
3 years |
N.W./CTN |
3KGS
|
Specifications
| Brand Name |
Plyfit |
Volume |
400ml |
| Net Filling Weight |
as your request |
Gross Weight |
as your request |
| Colors |
>100 colors |
Smell |
Aromatic |
| Ingredients |
100% Acrylic Resin |
Tack-Free Time |
8-15 minutes |
| Spray Rate |
99% |
Hard-dry Time |
30-60 minutes |
| Spray Speed |
>1.5g/s |
Finess |
<15um |
| Adhesiveness |
<2 Grade |
Bending |
>2mm (Good Flexity) |
| Hardness |
>HB (Scratch Resistant) |
Coverage |
About 2 square meters/can |
Application of Rubber Paint
1.Surface must be clean and dry.
2.To protect surrounding areas from overspray, tape off with newspaper.
3.Shake the can vigorously for one minute before use.
4.Holding the can 30cm from the prepared surface, begin by applying one light mist coat, spraying in a continuous motion across the surface working left to right.
5.Then pause, allowing the mist coat to set for 30 to 60 seconds, then apply additional coats working at 90° to the first coat.
6.If a thicker finish is required, allow at least one hour between extra coats. When painting over existing paint always check compatibility.
Detailing Images
Directions:
1. Cleaning the greasy dirt, water stains and dust of the spraying parts thoroughly.
2. Filling up hollow part with the atom ash and rub down.
3. Shaking the can about 2 minutes before the spraying and make sure it mix well
4. Pressing the nozzle with your forefinger and spraying the surfaces at a distance of 20 to 30cm with a constant speed.
5. By spraying several times, the performance effect i s better than one thick coating if you spray thin coating every two minutes.
6. After use, cleaning the nozzle by reversing the can and pressing the nozzle for three seconds in case of clogging before you store it.
Precautions:
1. Keep out of reach of the children.
2. Please keep can upwards and angle not less than 45.when application.
3. Please apply at ventilating place.
4. If spewed in the eyes incautiously, rinse thoroughly with plenty of water,then call physician.
5. Flammable, store under temperature of 45.C , do not store in the car or near heat and fire source,do not expose to sunshine, puncture or incinerate to the can;
6. The net weight and gross weight should be changed by the time goes, if any,it,s normal for this products, wastage rate is less than 2 % every year.
Advantage Of Acrylic Spray Paint
1. Over 18-year manufacturing experience;
2. Exporting experience in over 80 countries;
3. Quality Guarantee: ISO9001,REACH,TUV, Factory Audit, SASO;
4. On time delivery, professional R&D team, satisfied sales service;
5. Customized product available.
Your message must be between 20-3,000 characters!
Overall Rating
Rating Snapshot
The following is the distribution of all ratingsAll Reviews