Clean surface thoroughly removing all dirt grease, oil, wax, rust, moisture,etc.
Cover adjacent areas to protect from spray mist use at room temp.
Shake can vigorously for one minute before spraying and occasionally while is use to ensure color uniform it and prevent clogging.
On previously painted surface test spray in a small inconspicous area
hold can 12-16 inches from surface to be sprayed .press spray button firmly with stead even stroke while moving can rapidly back and forth finger must not protrude over front edge of spray button.
2 or 3 thin coats with intermittence of 10 min, are better than one continous heavy coat should paint bubble or run, you are too close to the surface or spraying too heavy coat after use, turn can upside down and depress valve button for several seconds to clear valve until only gas emerges so as to prevent clogging.
Discard empty can in trash pickup. Do not place in home garbage compactor or burn.