750ml Fire Retardant PU Foam Spray For Gap Filler Sealing Construction

750ml fire retardant pu foam for gap filler

General Purpose Construction Polyurethane Adhesive Sealant Pu Foam polystyrene spray foam spray foam house insulation

 

Product name	Polyurethane foam
Shelf life	1 year
Color	White
Advantage	Strong adhesion
Packaging	12pcs/carton
OEM/ODM	Avaliable

 

Technical Data Sheet for General Purpose Construction Polyurethane Adhesive Sealant Pu Foam polystyrene spray foam spray foam house insulation

ITEM	VALUE
Tack-Free Time(min)	7～15
Cutting Time(hour)	1～1.5(+25℃)
	2～3(-5℃)
Density(kg/㎥)	12～18
Yield(L)	30～35
Filling square(thickness 5cm)㎡	0.7～0.9
Thermal conductivity〔mW/(m·K)〕	＜40
Adhesive strength(kPa)	＞80
Tensile strength(kPa)	＞30(10﹪)
Bending strength(kPa)	＞70
Compressive strength(kPa)	＞100
Open cells content%	60～70
Water absorption(ML)	0.5~2 (no epidermis)
	＜0.5 (with epidermis)
Fire Class of the cured foam	B3
Dimensional stability(23℃)	0～1.5%(foaming direction)
	0～2.0%(flat direction)
Environment	Contains no CFC’s, no HCFC’s, Ozone friendly
Toxicity of cured foam	Non-toxicity
Service temperature range of cured foam℃	-40——+80
Application temperature range℃	-10——+35
Shelf life(month)	12

 

 

Art No. A0101    500ml/A0103   750ml

 

Surface Preparation

lSurface should be cleaned of dust and mortar clods

lSurface should be sprayed with water using water sprayer

lProtect window profiles from the foam’s outgrow

 

Product Preparation

lThe can temperature should be between +10 ºC to +30ºC

lOptimal temperature of can is +20 ºC

l If can temperature is too low, the product should be put into warm water of +30 ºC for 15 minutes or left overnight in room temperature.

 

Product Application Instruction

lShake the can vigorously(20-30 seconds valve down) in order to mix the components

lScrew the can onto the adaptor

lThe working position is valve down

lVertical gaps should be filled from down to up

lDo not fill the whole gap-foam grows in volume

l If you fill window or door gaps, the gaps maximum gap size should be 3 cm. Foam should not be used in gaps larger than 5 cm.

lThe speed of application and the thickness of the bead should be controlled by the adequate pressure on the gun or adaptor trigger.

l If you stop the application for time longer than 5 mins, remember to shake the can before continuation of works.

 

Finishing Works

lThe excess of foam should be cut after the foam has cured. The foam should not be pushed back into the gap when it’s still uncured as it will cause structural defects and worsen insulation effect.

lAfter the foam has fully cured it should be protected from UV by mortar or paint.

l If you want to keep using the same can after longer time the gun and the adaptor and valve should be cleaned with the cleaner for polyurethane foams.

 

Packing Details:

ART NO.	CONTENT	CAN MATERIALS	PACKING	CAN SIZE	CARTON SIZE	20’GP
A0101	300ml/pcs	Tinplate	12pcs/ctn	65x158 mm	276x206x 206mm	2500ctns/ 30000pcs
A0102	500ml/pcs	Tinplate	12pcs/ctn	65x198 mm	276x206x 260mm	1980ctns/ 23760pcs
A0103	750ml/pcs	Tinplate	12pcs/ctn	65x300 mm	276x206x 352mm	1320ctns/ 15840pcs

 

 

Detailing Images

 

 

Why choose us:

 

1. Over 13-year manufacturing experience;

 

2. 11-year golden supplier on Alibaba.com;

 

3. Exporting experience in over 80 countries;

 

4. Quality Guarantee: ISO9001,REACH,TUV, Factory Audit, SASO;

 

5. On time delivery, professional R&D team, satisfied sales service;

 

6. Customized product available.