Home
>
products
>
PU Foam Spray
>
|
|
| Place of Origin | Guangdong China |
| Brand Name | PLYFIT |
| Certification | REACH,SGS |
| Model Number | A0101/A0102/A0104l |
Waterproof gap filler compressed extruded PU Foam Spray for Construction
Art No. A0101 300ml/A0102 500ml/A0104 750ml
Advantage of product:
Multipurpose large expansion PU foam sealant is an one-component, self-expanding,multipurpose polyurethane foam. This foam will expand and cure by moisture in the air. It is used for a wide range of building applications. It is very good for filling and sealing with excellent mounting capacities, high thermal and acoustical insulation. Higher expansion rate than normal Pu foam.
ADVANTAGE
1. Can apply around 70 meters ( 30mm*15mm)
2. Most cost effective for each window or door.
3. No shrinkage and cracking after cured.
4. Better adhesion and harder.
CONSTRUCTION GUIDE
1. Shake can vigorously for one minute before use
2. Clean and pre-moisten surface before use
3. Firmly screw can on adapter, and turn the flow adjustment screw anticlockwise
4. Fill vertical joints from the bottom up when half filled enough
5. Foam begins to cure about ten minutes, wait for one hour before doing the next step.
6. Use knife to smooth out cured foam and treat surface with cement paint or silicone.
| As supplied at 25°C and R.H.50 % conditions | |
| Base |
Polyurethane
|
| Consistency |
Stable Foam
|
| Curing System | Moisture-cure |
| Tack-Free Time(min) | 7~12 |
| Cutting Time(hour) | ≥0.8 |
| Yield (L)900g.gw/750ml | 50-55 |
| Shrink | None |
| Cellular Structure | 60~65% open cells |
| Specific Gravity (kg/m³) | 18-25 |
| Temperature Resistance | -40℃~+80℃ |
| Application Temperature Range | 5℃~35℃ |
| Colour | Off white |
| Fire Class (DIN 4102 ) | B2 |
| Insulation Factor (Mw/m.k) | <20 |
| Compressive Strength (kPa) | >180 |
| Tensile Strength (kPa) | >30 (10%) |
| Adhesive Strengh(kPa) | >120 |
| Water Absorption (ML) |
0.3~8(no epidermis) <0.1(with epidermis)
|
Detailing Images
Contact Us at Any Time
