Fast Dry Water Removable Peelable Spray Rubber Paint For Cars
Plyfit Rubber paint is multi-purpose spray on rubber coating with excellent moisture, acid, alkaline & abrasion resistance. It protects against electrical shock, skidding/slipping & corrosion. For use on wood, metal, glass, rope, plastic, rubber, concrete & tools.
No corrosion / Flexible / Stylish / Insulating / Non-slip
Touch dry time: around 15 min.
Hard dry time: around 2 hours. It’s peelable after dried inside.
||Peelable Spray Paint
||MSDS, REACH, ROHS
Application of Rubber Paint
1.Surface must be clean and dry.
2.To protect surrounding areas from overspray, tape off with newspaper.
3.Shake the can vigorously for one minute before use.
4.Holding the can 30cm from the prepared surface, begin by applying one light mist coat, spraying in a continuous motion across the surface working left to right.
5.Then pause, allowing the mist coat to set for 30 to 60 seconds, then apply additional coats working at 90° to the first coat.
6.If a thicker finish is required, allow at least one hour between extra coats. When painting over existing paint always check compatibility.